Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSINFINITI2008EX35 BASE, AWDREPAIR AND DIAGNOSISTRANSMISSIONAUTOMATIC TRANSMISSIONECU DIAGNOSISTCMREFERENCE VALUEPHYSICAL VALUES
2008 Infiniti EX35 Base, AWD
Physical Values
2008 Infiniti EX35 Base, AWDSECTION Physical Values
PHYSICAL VALUES
| Terminal (Wire color) | Description | Condition | Value (Approx.) | |||
|---|---|---|---|---|---|---|
| + | - | Signal name | Input/Output | |||
| 1 (BR) | Ground | Power supply (Memory back-up) | Input | Always | Battery voltage | |
| 2 (BR) | Ground | Power supply (Memory back-up) | Input | Always | Battery voltage | |
| 3 (L) | - | CAN-H | Input/Output | - | - | |
| 4 (V) | - | K-line (CONSULT-III signal) | Input/Output | - | - | |
| 5 (B) | Ground | Ground | Output | Always | 0 V | |
| 6 (Y) | Ground | Power supply | Input | Ignition switch ON | Battery voltage | |
| Ignition switch OFF | 0 V | |||||
| 7 (R) | Ground | Back-up lamp relay | Input | Ignition switch ON | Selector lever in "R" position. | 0 V |
| Selector lever in other positions. | Battery voltage | |||||
| 8 (P) | - | CAN-L | Input/Output | - | - | |
| 9 (GR) | Ground | Starter relay | Output | Ignition switch ON | Selector lever in "N" and "P" positions. | Battery voltage |
| Selector lever in other positions. | 0 V | |||||
| 10 (B) | Ground | Ground | Output | Always | 0 V | |
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.