Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
Consult-III (C-III) Transmission Control Module (TCM) Reprogramming (1SH2)
2008 Infiniti EX35 Base, AWDSECTION Consult-III (C-III) Transmission Control Module (TCM) Reprogramming (1SH2)
Publication date: 2011-02-16
Reference number: 1SH2
CONSULT-III (C-III) TRANSMISSION CONTROL MODULE (TCM) REPROGRAMMING
Reference number: 1SH2
CONSULT-III (C-III) TRANSMISSION CONTROL MODULE (TCM) REPROGRAMMING
TECHNICAL SERVICE BULLETIN
Reference Number(s): 1SH2, Date of Issue:
February 16, 2011
| INFINITI: | All Infiniti |
| APPLIED VEHICLES: | All Infiniti |
GENERAL PROCEDURE
Updated February 16, 2011
A symptom based TSB is required before using this procedure.
IMPORTANT:
Before starting, make sure:
- ASIST on the CONSULT III (C-III) computer has been freshly synchronized (updated).
- All C-III software updates (if any) have been installed.
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.