Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSINFINITI2008EX35 AWD V6-3.5L (VQ35HR)REPAIR AND DIAGNOSISPOWER AND GROUND DISTRIBUTIONTESTING AND INSPECTIONSCAN TOOL TESTING AND PROCEDURESPOWER DISTRIBUTION SYSTEMCOMMON ITEM: CONSULT-III FUNCTION (BCM - COMMON ITEM)
2008 Infiniti EX35 AWD V6-3.5L (VQ35HR)
COMMON ITEM: CONSULT-III Function (BCM - COMMON ITEM)
2008 Infiniti EX35 AWD V6-3.5L (VQ35HR)SECTION COMMON ITEM: CONSULT-III Function (BCM - COMMON ITEM)
DIAGNOSIS SYSTEM (BCM)
COMMON ITEM
COMMON ITEM: CONSULT-III Function (BCM - COMMON ITEM)
APPLICATION ITEM
SYSTEM APPLICATION
FREEZE FRAME DATA (FFD) AND IGN COUNTER
Freeze Frame Data
The BCM records the following condition at the moment a particular DTC is detected.
- Vehicle Speed
- Odd Trip Meter
- Vehicle Condition (BCM detected condition)
IGN Counter
IGN counter indicates the number of times that ignition switch is turned ON after DTC is detected.
- The number is 0 when a malfunction is detected now.
- The number increases like 1--->2--->3...38--->39 after returning to the normal condition whenever ignition switch OFF--->ON.
- The number is fixed to 39 until the self-diagnosis results are erased if it is over 39.
COMMON ITEM
COMMON ITEM: CONSULT-III Function (BCM - COMMON ITEM)
APPLICATION ITEM
SYSTEM APPLICATION
FREEZE FRAME DATA (FFD) AND IGN COUNTER
Freeze Frame Data
The BCM records the following condition at the moment a particular DTC is detected.
- Vehicle Speed
- Odd Trip Meter
- Vehicle Condition (BCM detected condition)
IGN Counter
IGN counter indicates the number of times that ignition switch is turned ON after DTC is detected.
- The number is 0 when a malfunction is detected now.
- The number increases like 1--->2--->3...38--->39 after returning to the normal condition whenever ignition switch OFF--->ON.
- The number is fixed to 39 until the self-diagnosis results are erased if it is over 39.
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.