Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSINFINITI2008EX35 AWD V6-3.5L (VQ35HR)REPAIR AND DIAGNOSISPOWER AND GROUND DISTRIBUTIONTESTING AND INSPECTIONINITIAL INSPECTION AND DIAGNOSTIC OVERVIEWPOWER DISTRIBUTION SYSTEMBCM (BODY CONTROL MODULE)
2008 Infiniti EX35 AWD V6-3.5L (VQ35HR)
BCM (Body Control Module)
2008 Infiniti EX35 AWD V6-3.5L (VQ35HR)SECTION BCM (Body Control Module)
BCM (BODY CONTROL MODULE)
Fail-safe
HIGH FLASHER OPERATION
BCM detects the turn signal lamp circuit status by the current value.
BCM increases the turn signal lamp blinking speed if the bulb or harness open is detected with the turn signal lamp operating.
NOTE: The blinking speed is normal while activating the hazard warning lamp.
Fail-safe
B2013-B2607:
B2608-B2619 / B260A-B26E1:
HIGH FLASHER OPERATION
BCM detects the turn signal lamp circuit status by the current value.
BCM increases the turn signal lamp blinking speed if the bulb or harness open is detected with the turn signal lamp operating.
NOTE: The blinking speed is normal while activating the hazard warning lamp.
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.