Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSINFINITI2008EX35 AWD V6-3.5L (VQ35HR)REPAIR AND DIAGNOSISCRUISE CONTROLDISTANCE SENSORADJUSTMENTS
2008 Infiniti EX35 AWD V6-3.5L (VQ35HR)
Distance Sensor: Adjustments
2008 Infiniti EX35 AWD V6-3.5L (VQ35HR)SECTION Adjustments
Inspection and Adjustment
ADJUSTMENT
Always perform the laser beam aiming adjustment after replacing or removing/installing the ICC sensor integrated unit. Refer to CCS-8, "LASER BEAM AIMING ADJUSTMENT: Special Repair Requirement (Preparation)".
INSPECTION
Always perform the laser beam aiming adjustment and the ICC system operation inspection after replacing or removing/installing the ICC sensor integrated unit. Refer to CCS-13, "ACTION TEST: Special Repair Requirement (Vehicle-To-Vehicle Distance Control Mode)". Action Test
ADJUSTMENT
Always perform the laser beam aiming adjustment after replacing or removing/installing the ICC sensor integrated unit. Refer to CCS-8, "LASER BEAM AIMING ADJUSTMENT: Special Repair Requirement (Preparation)".
INSPECTION
Always perform the laser beam aiming adjustment and the ICC system operation inspection after replacing or removing/installing the ICC sensor integrated unit. Refer to CCS-13, "ACTION TEST: Special Repair Requirement (Vehicle-To-Vehicle Distance Control Mode)". Action Test
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.