Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSINFINITI2006G35 BASE, 2D COUPE, AUTOMATICREPAIR AND DIAGNOSIS (SINGLE PAGE)BODY & FRAMEDOOR LOCKSBODY, LOCK & SECURITY SYSTEM (COUPE)REMOTE KEYLESS ENTRY SYSTEMCONSULT-II FUNCTION (BCM)NOTES
2006 Infiniti G35 Base, 2D Coupe, Automatic
CONSULT-II Function (BCM): Notes
2006 Infiniti G35 Base, 2D Coupe, AutomaticSECTION Notes
The following functions are executed by combining data received and command transmitted via the communication line from the BCM.
CONSULT-II FUNCTION
| BCM diagnosis position | Inspection items and diagnosis mode | Description | |||||
|---|---|---|---|---|---|---|---|
| BCM(1) | Self-diagnosis results | Carries out the self-diagnosis. | |||||
| CAN diagnosis support monitor | Displays CAN communication system diagnosis, disabled transmission status, and communication status of each unit communicated with BCM. | ||||||
| Data monitor | Selection from menu | Displays the input data to BCM on real-time basis. | |||||
| IPDM E/R(2) | Self-diagnosis results | Carries out the self-diagnosis. | |||||
| Data monitor | Displays the input data to IPDM E/R on real-time basis. | ||||||
| Active test | Gives a drive to a load to check the operation. | ||||||
| MULTI REMOTE ENT | Data monitor | Displays the input remote keyless entry system data to BCM on real-time basis. | |||||
| Active test | Gives a drive to a load to check the operation. | ||||||
| Work support | Changes the setting for each function. | ||||||
|
|||||||
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.