Key Reminder Function

2006 Infiniti G35 Base, 2D Coupe, AutomaticSECTION Key Reminder Function

Key reminder functions have the following 3 functions.

KEY REMINDER FUNCTION OPERATION CONDITION

Key remainder function Operation condition Operation
When the driver door is open Key reminder function is operated when
  • Intelligent Key is inside the vehicle
  • Driver door is open
  • Door is locked by door lock and unlock switch or door lock knob
All doors unlock operation
When the door is open to closed Key reminder function is operated when
  • Intelligent Key is inside the vehicle
  • Any door is open
  • All doors are locked by door lock and unlock switch or door lock knob
  • All door are closed
  • All doors unlock operation
  • Sound Intelligent Key warning buzzer (Engine room) for 3 seconds
When the trunk is closed Key remainder function is operated when
  • Trunk lid opener cancel switch is ON
  • Intelligent Key is inside trunk room
  • all door are closed
  • all door are locked
  • trunk is closed
  • Trunk open operation.
  • Sound Intelligent Key warning buzzer (Engine room) for 10 seconds
CAUTION:
  • The above function operates when the Intelligent Key is inside the vehicle. However, there may be times when the Intelligent Key cannot be detected, and this function will not operate when the Intelligent Key is on the instrument panel, rear parcel shelf, or in the glove box. Also, this system sometimes does not operate if the Intelligent Key is in the door pocket for the open door.
  • When the key reminder function is operated when the trunk is open/closed and the buzzers sound, if the following operations are performed, the key reminder function is cleared and buzzer sounds are stopped.
    • Remote controller door lock button operation of Intelligent Key
    • Remote controller door unlock button operation of Intelligent Key
    • When the trunk is closed, the Intelligent Key is not inside the vehicle
    • When any door is open
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • β€’ You smell fuel, burning insulation, or see smoke.
  • β€’ Brakes feel soft, pull hard to one side, or make grinding noises.
  • β€’ The engine overheats, stalls repeatedly, or misfires under load.
  • β€’ You are missing required tools, torque specs, or safe lifting equipment.
  • β€’ You are not confident in the next step or safety outcome.