Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSINFINITI2006G35 BASE, 2D COUPE, AUTOMATICREPAIR AND DIAGNOSIS (SINGLE PAGE)ACCESSORIES & EQUIPMENTCOMMUNICATION DEVICESBODY CONTROL SYSTEM (COUPE)BCM (BODY CONTROL MODULE)CONSULT-II FUNCTION (BCM)CONSULT-II BASIC OPERATION
2006 Infiniti G35 Base, 2D Coupe, Automatic
Consult-II Basic Operation
2006 Infiniti G35 Base, 2D Coupe, AutomaticSECTION Consult-II Basic Operation
CAUTION:
If CONSULT-II is used with no connection of CONSULT-II CONVERTER, malfunctions might be detected in self-diagnosis depending on control unit which carry out CAN communication.
- With the ignition switch OFF, connect CONSULT-II and CONSULT- II CONVERTER to the data link connector, and then turn the ignition switch ON.
- Touch "START (NISSAN BASED VHCL)".
- Touch "BCM" on "SELECT SYSTEM" screen.
If "BCM" is not indicated, refer to "CONSULT-II Data Link Connector (DLC) Circuit ".
- Select the desired part to be diagnosed on the "SELECT TEST ITEM" screen.
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.