Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
Input/Output Signal Chart
2006 Infiniti FX35 AWDSECTION Input/Output Signal Chart
WARNING: This page is about a different car, the 2006 Infiniti FX45. However, it is still accessible from the selected car via links, so may be relevant.
INPUT/OUTPUT SIGNAL CHART - FUEL CUT CONTROL (AT NO LOAD AND HIGH ENGINE SPEED)
| Sensor | Input Signal to ECM | ECM function | Actuator | ||
|---|---|---|---|---|---|
| Park/neutral position (PNP) switch | Neutral position | Fuel cut control | Fuel injector | ||
| Accelerator pedal position sensor | Accelerator pedal position | ||||
| Engine coolant temperature sensor | Engine coolant temperature | ||||
| Crankshaft position sensor (POS) Camshaft position sensor (PHASE) |
Engine speed | ||||
| Wheel sensor | Vehicle speed(1) | ||||
|
|||||
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.