Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSINFINITI2006FX35 AWDREPAIR AND DIAGNOSISEXTERNAL PAGESDIFFERENT CARSECTION 1 (ENGINE MECHANICAL (VK45DE))PREPARATIONSPECIAL SERVICE TOOLS
2006 Infiniti FX35 AWD
Special Service Tools
2006 Infiniti FX35 AWDSECTION Special Service Tools
WARNING: This page is about a different car, the 2006 Infiniti FX45. However, it is still accessible from the selected car via links, so may be relevant.
The actual shapes of Kent-Moore tools may differ from those of special service tools illustrated here.
SPECIAL SERVICE TOOLS SPECIFICATIONS
| Tool number (Kent-Moore No.) Tool name | Description | |
|---|---|---|
| KV10111100 (J-37228) Seal cutter | Removing steel oil pan and front cover | |
| KV10114400 (J-38365) Heated oxygen sensor wrench | Loosening or tightening air fuel ratio sensors and heated oxygen sensors a: 22 mm (0.87 in) |
|
| EG15050500(J-45402) Compression gauge adapter | Inspection of compression pressure | |
| KV10116200 (J-26336-A) Valve spring compressor 1. KV10115900 (J-26336-20) Attachment 2. KV10109220 ( - ) Adapter |
Disassembling valve mechanism Part (1) is a component of KV10116200 (J26336-A), but part (2) is not so. | |
| KV101151S0 (J-38972) Lifter stopper set 1. KV10115110 (J-38972-1) Camshaft pliers 2. KV10115120 (J-38972-2) Lifter stopper | Changing valve lifter shims | |
| KV10112100 (BT8653-A) Angle wrench | Tightening bolts for bearing cap, cylinder head, etc. | |
| KV10114700 (J-38139) Main bearing cap remover | Removing crankshaft main bearing cap | |
| KV10107902 (J-38959) Valve oil seal puller | Removing valve oil seal | |
| KV10115600 (J-38958) Valve oil seal drift | Installing valve oil seal Use side A. a: 20 (0.79) dia. d: 8 (0.31) dia. b: 13 (0.51) dia. e: 10.7 (0.421) c: 10.3 (0.406) dia. f: 5 (0.20) Unit: mm (in) |
|
| EM03470000 (J-8037) Piston ring compressor | Installing piston assembly into cylinder bore | |
| ST16610001 (J-23907) Pilot bushing puller | Removing crankshaft pilot converter | |
| WS39930000 ( - ) Tube presser | Pressing the tube of liquid gasket | |
| - (J-45476) Ring gear stopper |
Removing and installing crankshaft pulley | |
| - (J-45488) Quick connector release |
Removing fuel tube quick connectors in engine room | |
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.