Safety Warning

DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.

SYS.OK|MANUAL.DB● LIVE

HOMESERVICE MANUALSINFINITI2006FX35 AWDREPAIR AND DIAGNOSISELECTRICALGAUGESDRIVER INFORMATION SYSTEMWARNING CHIMETERMINALS AND REFERENCE VALUE FOR BCM

2006 Infiniti FX35 AWD

Terminals and Reference Value for BCM

2006 Infiniti FX35 AWDSECTION Terminals and Reference Value for BCM

CAUTION:

Check combination switch system terminal waveform under the loaded condition with lighting switch, turn signal and wiper switch OFF not to be fluctuated by overloaded.
Turn wiper dial position to 4 except when checking waveform or voltage of wiper dial position. Wiper dial position can be confirmed on CONSULT-II. Refer to "DATA MONITOR ".

TERMINALS REFERENCE VALUE CHART

Terminal No.	Wire color	Item	Measuring condition			Reference value
Terminal No.	Wire color	Item	Ignition switch	Operation or condition		Reference value
2	G/Y	Combination switch input 5	ON	Lighting, turn, wiper switch (Wiper intermittent dial position 4)	OFF	Approx. 0 V
					Any of the conditions below Lighting switch 1ST Lighting switch HIGH beam (Operates only HIGH beam switch) Turn signal switch to right	Approx. 1.0 V
					Lighting switch 2ND	Approx. 2.0 V
3	L/B	Combination switch input 4	ON	Lighting, turn, wiper switch (Wiper intermittent dial position 4)	OFF	Approx. 0 V
					Front fog lamp switch (Operates only front fog lamp switch)	Approx. 0.8 V
					Any of the conditions below Lighting switch 2ND Lighting switch PASSING (Operates only PASSING switch) Turn signal switch to left	Approx. 1.0 V
4	PU/W	Combination switch input 3	ON	Lighting, turn, wiper switch (Wiper intermittent dial position 4)	OFF	Approx. 0 V
4	PU/W	Combination switch input 3	ON		Any of the conditions below Lighting switch AUTO Front wiper switch MIST Front wiper switch INT Front wiper switch LO	Approx. 1.0 V
5	Y/R	Combination switch input 2	ON	Lighting, turn, wiper switch	OFF	Approx. 0 V
					Any of the conditions below Front washer switch (Wiper intermittent dial position 4) Rear washer switch (Wiper intermittent dial position 4) Wiper intermittent dial position 1 Wiper intermittent dial position 5 Wiper intermittent dial position 6	Approx. 1.0 V
					Rear wiper switch ON (Wiper intermittent dial position 4)	Approx. 0.8 V
6	S/B	Combination switch input 1	ON	Lighting, turn, wiper switch	OFF	Approx. 0 V
					Any of the conditions below Front wiper switch HI (Wiper intermittent dial position 4) Rear wiper switch INT (Wiper intermittent dial position 4) Wiper intermittent dial position 3	Approx. 1.0 V
					Any of the conditions below Wiper intermittent dial position 1 Wiper intermittent dial position 2	Approx. 1.7 V
					Any of the conditions below Wiper intermittent dial position 6 Wiper intermittent dial position 7	Approx. 0.8 V
32	GY/R	Combination switch output 5	ON	Lighting, turn, wiper switch	OFF (Wiper intermittent dial position 4)	Approx. 7.2 V
32	GY/R	Combination switch output 5	ON	Lighting, turn, wiper switch	Any of the conditions below Front fog lamp switch (Operates only front fog lamp switch) Rear wiper switch ON (Wiper intermittent dial position 4) Wiper intermittent dial position 1 Wiper intermittent dial position 2 Wiper intermittent dial position 6 Wiper intermittent dial position 7	Approx. 1.0 V
33	G	Combination switch output 4	ON	Lighting, turn, wiper switch	OFF (Wiper intermittent dial position 4)	Approx. 7.2 V
33	G	Combination switch output 4	ON	Lighting, turn, wiper switch	Any of the conditions below Lighting switch AUTO (Wiper dial position 4) Lighting switch 1ST (The same result with lighting switch 2ND) (Wiper intermittent dial position 4) Rear wiper switch INT (Wiper intermittent dial position 4) Wiper intermittent dial position 1 Wiper intermittent dial position 5 Wiper intermittent dial position 6	Approx. 1.2 V
34	W/B	Combination switch output 3	ON	Lighting, turn, wiper switch	OFF	Approx. 7.2 V
34	W/B	Combination switch output 3	ON	Lighting, turn, wiper switch	Any of the conditions below Lighting switch 2ND Lighting switch HI beam (Operates only HI beam switch) Rear washer switch (Wiper intermittent dial position 4) Wiper intermittent dial position 1 Wiper intermittent dial position 2 Wiper intermittent dial position 3	Approx. 1.2 V
35	W/G	Combination switch output 2	ON	Lighting, turn, wiper switch (Wiper intermittent dial position 4)	OFF	Approx. 7.2 V
35	W/G	Combination switch output 2	ON		Any of the conditions below Lighting switch 2ND Lighting switch PASSING (Operates only PASSING switch) Front wiper switch INT Front wiper switch HI	Approx. 1.2 V
36	W/R	Combination switch output 1	ON	Lighting, turn, wiper switch (Wiper intermittent dial position 4)	OFF	Approx. 7.2 V
36	W/R	Combination switch output 1	ON		Any of the conditions below Turn signal switch to right Turn signal switch to left Front wiper switch MIST Front wiper switch LO Front washer switch	Approx. 1.2 V
37	B/W	Key switch signal	OFF	Key is removed		Approx. 0 V
37	B/W	Key switch signal	OFF	Key is inserted		Battery voltage
38	W/L	Ignition power supply	ON	-		Battery voltage
39	L	CAN-H	OFF	-		-
40	P	CAN-L	OFF	-		-
42	L/R	Battery power supply	OFF	-		Battery voltage
49	B	Ground	ON	-		Approx. 0 V
52	B	Ground	ON	-		Approx. 0 V
55	G	Battery power supply	OFF	-		Battery voltage
62	W	Front door switch (Driver side)	OFF	When driver side door is opened (Door switch ON)		Approx. 0 V
62	W	Front door switch (Driver side)	OFF	When driver side door is closed (Door switch OFF)		Approx. 12 V

RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

Shop Manual-Ready Tools Free Quote Check Quote Shield Pro

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

• You smell fuel, burning insulation, or see smoke.
• Brakes feel soft, pull hard to one side, or make grinding noises.
• The engine overheats, stalls repeatedly, or misfires under load.
• You are missing required tools, torque specs, or safe lifting equipment.
• You are not confident in the next step or safety outcome.