Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSINFINITI2006FX35 AWDREPAIR AND DIAGNOSISELECTRICALGAUGESDRIVER INFORMATION SYSTEMWARNING CHIMELIGHTING SWITCH SIGNAL INSPECTION
2006 Infiniti FX35 AWD
Lighting Switch Signal Inspection
2006 Infiniti FX35 AWDSECTION Lighting Switch Signal Inspection
- CHECK BCM INPUT SIGNAL
- Select "BCM" on CONSULT-II.
- With "DATA MONITOR" of "BUZZER", confirm "LIGHT SW 1ST" when the lighting switch is operated.
"LIGHT SW 1ST"
Lighting switch ON (1st position) : ON
Lighting switch OFF : OFF
OK or NG
OK : INSPECTION END
NG : Check the lighting switch. Refer to "COMBINATION SWITCH INSPECTION ".
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.