Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
Terminals and Reference Value for Rear View Camera Control Unit
2006 Infiniti FX35 AWDSECTION Terminals and Reference Value for Rear View Camera Control Unit
TERMINALS REFERENCE VALUE CHART
| Terminals | Item | Condition | Reference value | ||
|---|---|---|---|---|---|
| Terminal No. | Wire color | Ignition switch | Operation | ||
| 1 | R/W | Battery power supply | OFF | - | Battery voltage |
| 2 | LG | Ignition power supply | ACC | - | Battery voltage |
| 3 | B | Ground | ON | - | Approx. 0 V |
| 4 | OR | Reverse signal input | ON | A/T selector lever R range position | Battery voltage |
| A/T selector lever in other than R range position | Approx. 0 V | ||||
| 5 | G/Y | CONTROL 1 | ON | - | Approx. 0 V |
| 6 | PU | DDL | - | - | - |
| 8 | R/W | Camera power output | ON | A/T selector lever R range position | Approx. 6 V |
| 9 | - | Camera image input (-) | ON | - | Approx. 0 V |
| 10 | W | Camera image input (+) | ON | A/T selector lever R range position | |
| 11 | - | Shield ground | - | - | - |
| 12 | L | Composite image output | ON | A/T selector lever R range position | |
| 14 | R | Composite image synchronization signal output | ON | A/T selector lever R range position | |
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.