Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
Terminals and Reference Value for LDW Camera Unit
2006 Infiniti FX35 AWDSECTION Terminals and Reference Value for LDW Camera Unit
TERMINALS REFERENCE VALUE CHART
| Terminal No. | Wire Color | Item | Condition | Reference Value (Approx. [V]) | ||
|---|---|---|---|---|---|---|
| Ignition switch | Operation or condition | |||||
| 1 | B/R | Ignition power supply | ON | - | Battery voltage | |
| 3 | R/W | LDW chime | ON | LDW chime | Activated* | 0 |
| Not activated | 12 | |||||
| 4 | Y | System ON indicator | ON | LDW system | ON | 0 |
| OFF | 12 | |||||
| 5 | R | CAN-L | - | - | - | |
| 6 | B | Ground | ON | - | 0 | |
| 8 | G/W | LDW indicator lamp | ON | LDW indicator lamp | Illuminated* | 0 |
| Turned OFF | 12 | |||||
| 9 | G | LDW switch | ON | LDW switch | Pressed | 0 |
| Released | 5 | |||||
| 10 | L | CAN-H | - | - | - | |
| 11 | - | Shield | - | - | - | |
| 12 | B | Ground | ON | - | 0 | |
NOTE:
*: Perform "ACTIVE TEST" with CONSULT-II. Refer to
"ACTIVE TEST ".
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.