Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
Components Description
2006 Infiniti FX35 AWDSECTION Components Description
COMPONENT CHART
| Component | Description |
|---|---|
| LDW camera unit | Detects the lane marker by the built-in camera, gives judgement for the warning according to the result of detection and signals from each unit, and transmits the operation signal to LDW chime and LDW indicator lamp. |
| LDW switch |
|
| LDW chime | Gives a warning chime according to the direction from LDW camera unit. |
| LDW indicator lamp | Installed in combination meter, and indicates the system condition.
|
| BCM | Transmits turn indicator signal to LDW camera unit with CAN communication signal. |
| ABS actuator and electric unit (control unit) | Transmits vehicle speed signal to LDW camera unit with CAN communication signal. |
| TCM | Transmits vehicle speed signal to LDW camera unit with CAN communication signal. (For detecting incorrect speed.) |
NOTE:
*: This indicates in a few seconds for the system check during ignition switch ON.
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.