SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSINFINITI2006FX35 AWDREPAIR AND DIAGNOSISELECTRICALGAUGESDRIVER INFORMATION SYSTEMCOMBINATION METERSDISASSEMBLY AND ASSEMBLY OF COMBINATION METERDISASSEMBLY
2006 Infiniti FX35 AWD

Disassembly and Assembly of Combination Meter: Disassembly

2006 Infiniti FX35 AWDSECTION Disassembly
  1. Remove screws (A) and remove rear cover (1).
  2. Disconnect ODO/trip meter and illumination control switch connector (2).
    Fig 1: Identifying ODO/TRIP Meter And Illumination Control Switch Connector
    G04078464Courtesy of NISSAN MOTOR CO., U.S.A.
  3. Remove screws (A).
    Fig 2: Identifying Screws
    G04078465Courtesy of NISSAN MOTOR CO., U.S.A.
  4. Remove tabs (A) and remove switch and meter housing (1).
    Fig 3: Identifying Switch And Meter Housing
    G04078466Courtesy of NISSAN MOTOR CO., U.S.A.
  5. Remove screws (A) and remove reinforcing metal (1).
    Fig 4: Identifying Reinforcing Metal
    G04078467Courtesy of NISSAN MOTOR CO., U.S.A.
  6. Remove screws (A) and remove plate (1).
    Fig 5: Identifying Plate
    G04078468Courtesy of NISSAN MOTOR CO., U.S.A.
  7. Disengage tabs (A) to separate front cover (1).
    Fig 6: Identifying Separated Front Cover
    G04078469Courtesy of NISSAN MOTOR CO., U.S.A.
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

Shop Manual-Ready ToolsFree Quote CheckQuote Shield Pro

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • • You smell fuel, burning insulation, or see smoke.
  • • Brakes feel soft, pull hard to one side, or make grinding noises.
  • • The engine overheats, stalls repeatedly, or misfires under load.
  • • You are missing required tools, torque specs, or safe lifting equipment.
  • • You are not confident in the next step or safety outcome.