Safety Warning

DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.

SYS.OK|MANUAL.DB● LIVE

HOMESERVICE MANUALSINFINITI2006FX35 AWDREPAIR AND DIAGNOSISBODY & FRAMEWINDOWSGLASS, WINDOW & MIRRORSPOWER WINDOW SYSTEMCHECK LIMIT SWITCH CIRCUIT (PASSENGER SIDE)

2006 Infiniti FX35 AWD

Check Limit Switch Circuit (Passenger Side)

2006 Infiniti FX35 AWDSECTION Check Limit Switch Circuit (Passenger Side)

CHECK FRONT POWER WINDOW SWITCH (PASSENGER SIDE) LIMIT SIGNAL

Turn ignition switch ON.

Check voltage between front power window motor (passenger side) connector and ground.

TERMINALS VOLTAGE CHART

Connector	Terminals (Wire color)		Condition	Voltage [V] (Approx.)
Connector	(+)	(-)	Condition	Voltage [V] (Approx.)
D38	5 (GY)	Ground	Passenger side door window is between fully-open and just before fully-closed position (ON)	0
D38	5 (GY)	Ground	Passenger side door window is between just before fully closed position and fully closed position (OFF)	5

Fig 1: Identifying Voltage Between Front Power Window Motor Connector And Ground

Courtesy of NISSAN MOTOR CO., U.S.A.

OK or NG

OK : Limit switch circuit is OK.

NG : GO TO 2.

CHECK GROUND CIRCUIT
1. Turn ignition switch OFF.
2. Disconnect front power window motor (passenger side) connector.
3. Check continuity between front power window motor (passenger side) connector D38 terminal 6 and ground.
  6 (SB) - Ground : Continuity should exist.
  
  Fig 2: Identifying Continuity Between Front Power Window Motor Connector D38 Terminal 6 And Ground
  Courtesy of NISSAN MOTOR CO., U.S.A.
OK or NG

OK : GO TO 4.

NG : GO TO 3.
CHECK HARNESS CONTINUITY 1
1. Disconnect front power window switch (passenger side) connector.
2. Check continuity between front power window switch (passenger side) connector D36 terminal 3 and front power window motor (passenger side) connector D38 terminal 6.
  3 (SB) - 6 (SB) : Continuity should exist.
  
  Fig 3: Identifying Continuity Between Front Power Window Switch Terminal 3 And Front Power Window Motor Terminal 6
  Courtesy of NISSAN MOTOR CO., U.S.A.
OK or NG

OK : Replace front power window switch (passenger side).

NG : Repair or replace harness.
CHECK FRONT POWER WINDOW SWITCH (PASSENGER SIDE) OUTPUT SIGNAL
1. Turn ignition switch ON.
2. Check voltage between front power window switch (passenger side) connector D36 terminal 15 and ground.
  15 (GY) - Ground : Approx. 5V
  
  Fig 4: Identifying Voltage Between Front Power Window Switch Connector D36 Terminal 15 And Ground
  Courtesy of NISSAN MOTOR CO., U.S.A.
OK or NG

OK : GO TO 5

NG : Replace front power window switch (passenger side).
CHECK HARNESS CONTINUITY 2
1. Turn ignition switch OFF.
2. Disconnect front power window switch (passenger side) connector.
3. Check continuity between front power window switch (passenger side) connector D36 terminal 15 and front power window motor (passenger side) connector D38 terminal 5.
  15 (GY) - 5 (GY) : Continuity should exist.
  
  Fig 5: Identifying Continuity Between Front Power Window Switch Terminal 15 And Front Power Window Motor Terminal 5
  Courtesy of NISSAN MOTOR CO., U.S.A.
OK or NG

OK : Replace front power window motor (passenger side).

NG : Repair or replace harness.

RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

Shop Manual-Ready Tools Free Quote Check Quote Shield Pro

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

• You smell fuel, burning insulation, or see smoke.
• Brakes feel soft, pull hard to one side, or make grinding noises.
• The engine overheats, stalls repeatedly, or misfires under load.
• You are missing required tools, torque specs, or safe lifting equipment.
• You are not confident in the next step or safety outcome.