SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSINFINITI2006FX35 AWDREPAIR AND DIAGNOSISACCESSORIES & EQUIPMENTINTERIOR/ILLUMINATION LIGHTSLIGHTING SYSTEMDAYTIME LIGHT SYSTEMTERMINALS AND REFERENCE VALUES FOR BCM
2006 Infiniti FX35 AWD

Terminals and Reference Values for BCM

2006 Infiniti FX35 AWDSECTION Terminals and Reference Values for BCM
TERMINALS AND REFERENCE VALUES CHART

Terminal No. Wire color Signal name Measuring condition Reference value
Ignition switch Operation or condition
2 GY Combination switch input 5 ON Lighting, turn, wiper switch (Wiper intermittent dial position 4) OFF Approx. 0 V
Lighting switch 2ND
G04078176

Approx. 2.0 V
3 L/B Combination switch input 4 ON Lighting, turn, wiper switch (Wiper intermittent dial position 4) OFF Approx. 0 V
Front fog lamp switch (Operate only front fog lamp switch)
G04084256

Approx. 0.8 V
Any of the conditions below
  • Lighting switch 2ND
  • Lighting switch PASSING (Operates only PASSING switch)
G04084530

Approx. 1.0 V
4 PU/W Combination switch input 3 ON Lighting, turn, wiper switch (Wiper intermittent dial position 4) OFF Approx. 0 V
Any of the conditions below
  • Lighting switch AUTO
G04084530

Approx. 1.0 V
32 GY/R Combination switch output 5 ON Lighting, turn, wiper switch (Wiper intermittent dial position 4) OFF
G04078527

Approx. 7.2 V
Front fog lamp switch (Operates only front fog lamp switch)
G04078181

Approx. 1.0 V
33 G Combination switch output 4 ON Lighting, turn, wiper switch (Wiper intermittent dial position 4) OFF
G04078527

Approx. 7.2 V
Lighting switch AUTO
G04084542

Approx. 1.2 V
34 W/B Combination switch output 3 ON Lighting, turn, wiper switch (Wiper intermittent dial position 4) OFF
G04078527

Approx. 7.2 V
Lighting switch 2ND
G04084542

Approx. 1.2 V
35 W/G Combination switch output 2 ON Lighting, turn, wiper switch (Wiper intermittent dial position 4) OFF
G04078527

Approx. 7.2 V
Any of the conditions below
  • Lighting switch 2ND
  • Lighting switch PASSING (Operates only PASSING switch)
G04084542

Approx. 1.2 V
38 W/L Ignition switch (ON) ON - Battery voltage
39 L CAN - H - - -
40 P CAN - L - - -
42 L/R Battery power supply OFF - Battery voltage
49 B Ground ON - Approx. 0 V
52 B Ground ON - Approx. 0 V
55 G Battery power supply OFF - Battery voltage
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

Shop Manual-Ready ToolsFree Quote CheckQuote Shield Pro

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • • You smell fuel, burning insulation, or see smoke.
  • • Brakes feel soft, pull hard to one side, or make grinding noises.
  • • The engine overheats, stalls repeatedly, or misfires under load.
  • • You are missing required tools, torque specs, or safe lifting equipment.
  • • You are not confident in the next step or safety outcome.