SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSINFINITI2006FX35 AWDREPAIR AND DIAGNOSISACCESSORIES & EQUIPMENTINTERIOR/ILLUMINATION LIGHTSLIGHTING SYSTEMDAYTIME LIGHT SYSTEMSYSTEM DESCRIPTIONOUTLINE
2006 Infiniti FX35 AWD

System Description: Outline

2006 Infiniti FX35 AWDSECTION Outline

Power is supplied at all times

  • through 10A fuse [No. 19, located in fuse block (J/B)]
  • to combination meter terminal 8,
  • through 15A fuse [No. 22, located in fuse block (J/B)]
  • to BCM terminal 42,
  • through 50A fusible link (letter M, located in fuse, fusible link and relay box)
  • to BCM terminal 55,
  • through 10A fuse (No. 36, located in fuse, fusible link and relay box)
  • to daytime light relay terminals 2 and 5.

When ignition switch is in ON or START position, power is supplied

  • through 10A fuse [No. 12, located in fuse block (J/B)]
  • to combination meter terminal 7,
  • through 15A fuse [No. 1, located in fuse block (J/B)]
  • to BCM terminal 38.

Ground is supplied

  • to combination meter terminals 5, 6 and 15
  • through grounds M35, M45 and M85,
  • to BCM terminals 49 and 52
  • through grounds M35, M45 and M85.
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

Shop Manual-Ready ToolsFree Quote CheckQuote Shield Pro

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • • You smell fuel, burning insulation, or see smoke.
  • • Brakes feel soft, pull hard to one side, or make grinding noises.
  • • The engine overheats, stalls repeatedly, or misfires under load.
  • • You are missing required tools, torque specs, or safe lifting equipment.
  • • You are not confident in the next step or safety outcome.