Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
CONSULT-II Functions (IPDM E/R): Notes
2006 Infiniti FX35 AWDSECTION Notes
CONSULT-II can display each diagnostic item using the diagnostic test mode shown following.
ITEM DISPLAY CHART
| Check Item, Diagnosis Mode | Description |
|---|---|
| SELF-DIAGNOSTIC RESULTS | Refer to "SELF-DIAG RESULTS ". |
| DATA MONITOR | The input/output data of IPDM E/R is displayed in real time. |
| CAN DIAG SUPPORT MNTR | The result of transmit/receive diagnosis of CAN communication can be read. |
| ACTIVE TEST | IPDM E/R sends a drive signal to electronic components to check their operation. |
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.