SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSINFINITI2006FX35 AWDREPAIR AND DIAGNOSISACCESSORIES & EQUIPMENTINFOTAINMENTAUDIO, VISUAL, NAVIGATION & TELEPHONE SYSTEMINTEGRATED DISPLAY SYSTEMTERMINALS AND REFERENCE VALUE FOR DISPLAY CONTROL UNIT
2006 Infiniti FX35 AWD

Terminals and Reference Value for Display Control Unit

2006 Infiniti FX35 AWDSECTION Terminals and Reference Value for Display Control Unit
TERMINALS AND REFERENCE VALUE FOR DISPLAY CONTROL UNIT

Terminal (Wire color) Item Signal input/output Condition Reference value
+ - Ignition switch Operation
1 (W/L) Ground Battery power supply Input OFF - Battery voltage
2 (W/G) Ground Power supply (Inverter) Output ON - Approx. 9 V
3 (B) Ground Ground - ON - Approx. 0 V
4 (BR/W) Ground Power supply (Signal) Output ON - Approx. 9 V
5 (P) Ground Ground (Inverter) - ON - Approx. 0 V
6 (OR) Ground Reverse signal Input ON Selector lever in R position Approx. 12 V
Selector lever except in R position Approx. 0 V
7 (P/L) Ground Ground (Signal) - ON - Approx. 0 V
10 (LG) Ground ACC power supply Input ACC - Battery voltage
12 (W) Ground Ignition signal Input ON - Battery voltage
13 (B) Ground Ground - ON - Approx. 0 V
14 (R/L) Ground Illumination signal Input OFF Lighting switch ON Approx. 12 V
Lighting switch OFF Approx. 0 V
16 (G) Ground Vehicle speed signal (8-pulse) Input ON When vehicle speed is approx. 25 MPH (40 km/h)
NOTE: Maximum voltage may be 5 V due to specifications (connected units).
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

Shop Manual-Ready ToolsFree Quote CheckQuote Shield Pro

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • • You smell fuel, burning insulation, or see smoke.
  • • Brakes feel soft, pull hard to one side, or make grinding noises.
  • • The engine overheats, stalls repeatedly, or misfires under load.
  • • You are missing required tools, torque specs, or safe lifting equipment.
  • • You are not confident in the next step or safety outcome.