Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
Terminals and Reference Value for DVD Display
2006 Infiniti FX35 AWDSECTION Terminals and Reference Value for DVD Display
TERMINALS AND REFERENCE VALUE FOR DVD DISPLAY
| Terminal (Wire color) | Item | Signal input/output | Condition | Reference value | ||
|---|---|---|---|---|---|---|
| (+) | (-) | Ignition switch | Operation | |||
| 1 (G) | 3 | MES input signal (common) | Input | ACC | Play CD or DVD video | Approx. 0 V |
| 2 (L) | 3 | MES input signal (L+) | Input | ACC | Play CD or DVD video | |
| 3 | - | Shield | - | - | - | - |
| 4 (Y) | 3 | MES input signal (R+) | Input | ACC | Play cd or DVD video | |
| 5 (L) | Ground | Switch power | Input | ACC | - | Approx. 5 V |
| 6 (LG) | Ground | Ground | - | ON | - | Approx. 0 V |
| 7 (OR) | 8 (W) | VIDEO input signal | Input | ACC | Play DVD video | |
| 9 | - | Shield (Video) | - | - | - | - |
| 10 (PU) | - | Shield (MES data) | - | - | - | - |
| 12 (PU) | Ground | Ground | - | ON | - | Approx. 0 V |
| 13 (GY) | 10 (PU) | DVD communication signal RX (DVD - LCD) | Input | ACC | Press "POWER" switch of DVD player | |
| 14 (BR) | 10 (PU) | DVD communication signal TX (LCD - DVD) | Output | ACC | Press "POWER" switch of DVD player | |
| 15 (Y) | Ground | Battery power supply | Input | OFF | - | Battery voltage |
| 16 (R) | ||||||
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.