Safety Warning

DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.

SYS.OK|MANUAL.DB● LIVE

HOMESERVICE MANUALSINFINITI2006FX35 AWDREPAIR AND DIAGNOSISACCESSORIES & EQUIPMENTINFOTAINMENTAUDIO, VISUAL, NAVIGATION & TELEPHONE SYSTEMAUDIOTERMINALS AND REFERENCE VALUE FOR A/C AND AV SWITCH

2006 Infiniti FX35 AWD

Terminals and Reference Value for A/C and AV Switch

2006 Infiniti FX35 AWDSECTION Terminals and Reference Value for A/C and AV Switch

TERMINALS AND REFERENCE VALUE FOR A/C AND AV SWITCH

Terminal (Wire color)

Item

Signal input/output

Condition

Reference value

Ignition switch

Operation

1 (W/L)

Ground

Battery power supply

Input

OFF

Battery voltage

2 (LG)

Ground

ACC power supply

Input

ACC

Battery voltage

5 (B)

Ground

Approx. 0 V

6 (PU)

Ground

Communication signal (+)

Input/Output

Shield

8 (LG)

Ground

Communication signal (-)

Input/Output

12 (R/W)

Ground

Steering SW A

Input

Press and hold PTT ⁽¹⁾ switch

Approx. 0 V

Press and hold MODE⁽²⁾ switch

Approx. 0 V

Press and hold SEEK UP switch

Approx. 1.7 V

Press and hold VOL UP switch

Approx. 3.3 V

Except for above

Approx. 5 V

13 (G/W)

Ground

Steering SW B

Input

Press and hold MODE⁽¹⁾ switch

Approx. 0 V

Press and hold POWER⁽²⁾ switch

Approx. 0 V

Press and hold SEEK DOWN switch

Approx. 1.7 V

Press and hold VOL DOWN switch

Approx. 3.3 V

Except for above

Approx. 5 V

14 (B/Y)

Ground

Steering SW ground

Approx. 0 V

⁽¹⁾ With telephone system
⁽²⁾ Without telephone system

RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

Shop Manual-Ready Tools Free Quote Check Quote Shield Pro

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

• You smell fuel, burning insulation, or see smoke.
• Brakes feel soft, pull hard to one side, or make grinding noises.
• The engine overheats, stalls repeatedly, or misfires under load.
• You are missing required tools, torque specs, or safe lifting equipment.
• You are not confident in the next step or safety outcome.