Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSINFINITI2006FX35 AWD V6-3.5L (VQ35DE)REPAIR AND DIAGNOSISWIPER AND WASHER SYSTEMSTESTING AND INSPECTIONFRONT WIPER SYSTEMCONTROL MODULE PINOUT VALUESTERMINALS AND REFERENCE VALUES FOR BCM
2006 Infiniti FX35 AWD V6-3.5L (VQ35DE)
Terminals and Reference Values For BCM
2006 Infiniti FX35 AWD V6-3.5L (VQ35DE)SECTION Terminals and Reference Values For BCM
Terminals And Reference Values For BCM Part 1:
Terminals And Reference Values For BCM Part 2:
Terminals And Reference Values For BCM Part 3:
Terminals And Reference Values For BCM Part 4:
Terminals and Reference Values for BCM
CAUTION:
- Check combination switch system terminal waveform under the loaded condition with lighting switch, turn signal switch and wiper switch OFF not to be fluctuated by overloaded.
- Turn wiper dial position to 4 except when checking waveform or voltage of wiper dial position. Wiper dial position can be confirmed on CONSULT-II. Refer to LT-119, "DATA MONITOR". Scan Tool Testing and Procedures
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.