Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSINFINITI2006FX35 AWD V6-3.5L (VQ35DE)REPAIR AND DIAGNOSISENGINE, COOLING AND EXHAUSTENGINESPECIFICATIONSTIGHTENING TORQUES & SEQUENCESINTAKE MANIFOLD
2006 Infiniti FX35 AWD V6-3.5L (VQ35DE)
Intake Manifold
2006 Infiniti FX35 AWD V6-3.5L (VQ35DE)SECTION Intake Manifold
Intake Manifold
^ If stud bolts were removed, install them and tighten to the specified torque below.
Torque 10.8 Nm (1.1 kg-m, 8 ft. lbs.)
^ Tighten all mounting bolts and nuts to the specified torque in two or more steps in numerical order shown in the figure.
1st step 7.4 Nm (0.75 kg-m, 5 ft. lbs.)
2nd step and after 29.0 Nm (3.0 kg-m, 21 ft. lbs.)
^ If stud bolts were removed, install them and tighten to the specified torque below.
Torque 10.8 Nm (1.1 kg-m, 8 ft. lbs.)
^ Tighten all mounting bolts and nuts to the specified torque in two or more steps in numerical order shown in the figure.
1st step 7.4 Nm (0.75 kg-m, 5 ft. lbs.)
2nd step and after 29.0 Nm (3.0 kg-m, 21 ft. lbs.)
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.