2003 Infiniti FX45FACTORY OEM SERVICE PROCEDURE

Key Fob Interlock Operation

  • Perform memory operation, exiting operation and entry operation by pressing key fob unlock button.
    Fig 1: Key Fob Interlock Operation Flow Chart
    G03107540Courtesy of NISSAN MOTOR CO., U.S.A.
NOTE:
  • If steering wheel operation is cancelled, the system performs seat and mirror operation only.
  • If Entry/Exiting operation is cancelled, the system performs steering wheel operation and mirror operation only.
  • If ignition switch turns ON in the middle of memory operation, the system does not perform exiting operation after memory operation.
  • If ignition switch turns ON in the middle of exiting operation, entry operation starts at that time.
Factory Service Tools

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • β€’ You smell fuel, burning insulation, or see smoke.
  • β€’ Brakes feel soft, pull hard to one side, or make grinding noises.
  • β€’ The engine overheats, stalls repeatedly, or misfires under load.
  • β€’ You are missing required tools, torque specs, or safe lifting equipment.
  • β€’ You are not confident in the next step or safety outcome.