Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
Setting Change Function
The settings of the automatic driving positioner system can be changed, using CONSULT-II and the display unit in the center of the instrument panel.
| Setting item | Content | CONSULT-II (WORK SUPPORT) | Display unit | Factory setting |
|---|---|---|---|---|
| Change seat sliding volume setting | The distance at retain operation can be selected from the following 3 modes. | 40 mm | - | X |
| 80 mm | - | |||
| 150 mm | - | |||
| Change the Entry/Exit seat slide function setting | The seat sliding turnout and return at entry/exit can be selected: ON (operated) - OFF (not operated) | ON | ON: Indicator lamp ON | X |
| OFF | OFF: Indicator lamp OFF | - | ||
| Change the Entry/Exit tilt steering wheel function setting | Lift up and backward steering wheel at entry and exit can be selected: ON (operated) - OFF (not operated) | ON | ON: Indicator lamp ON | X |
| OFF | OFF: Indicator lamp OFF | - | ||
| Reset custom settings | All settings to default. | - | Default: Setting button OFF | - |
It is possible to set sliding driver seat for entry/exit of vehicle by pressing set switch.
| Content | Setting change operation | Indicator LEDs |
|---|---|---|
| The seat sliding turnout and steering wheel up/backward at entry/exit can be operated. | Press the set switch for more than 10 seconds | Blinking twice |
| The seat sliding turnout and steering wheel up/backward at entry/exit can be not operated. | Blinking ones |
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.
Rather have a pro handle this?
A certified mobile mechanic comes to your home or office. They bring the tools, you stay comfortable. No tow truck, no waiting room, no surprises.
No obligation. See pricing before you book.