SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSINFINITI1992M30 2D CONVERTIBLEREPAIR AND DIAGNOSIS (SINGLE PAGE)GENERAL INFORMATIONRESTRAINTSAIR BAG AND SUPPLEMENTAL RESTRAINT SYSTEM (SRS) COMPONENT INSPECTION & REPLACEMENT TABLESDAEWOO (1999-02)
1992 Infiniti M30 2D Convertible

DAEWOO (1999-02)

1992 Infiniti M30 2D ConvertibleSECTION DAEWOO (1999-02)
WARNING: Accidental air bag deployment is possible. Personal injury may result. Avoid area near steering wheel and instrument panel even if air bags have deployed. Dual-stage air bag modules may be present that could contain an undeployed stage. When disposing of a deployed dual-stage air bag, always treat it as a "live" module. See appropriate AIR BAG RESTRAINT SYSTEMS article.
APPLICATION - DAEWOO

Make/Model Year Location Table
Lanos 1999-02 D-P Daewoo-1 
Leganza 1999-02 D-P Daewoo-1 
Nubira 1999-02 D-P Daewoo-1 
       
D-P

Driver's & Passenger's Side

D-P2

Driver's & Passenger's Side (Dual-Stage)

DS

Driver's Side

HI

Head Impact

KI

Knee Impact

SI

Side Impact

PS2

Passenger's Side (Dual-Stage)

Daewoo-1

Replace After Deployment Inspect & If Damaged Replace Component (Even If Air Bag Did Not Deploy) Comments
Deployed air bag modules; Air bag wiring harness(1); Clockspring(1); Deployed seat belt pretensioners (if equipped); Sensing-diagnostic module; Instrument panel braces; Knee bolsters & mounting points; Satellite sensors (if equipped); Seat belts & mounting points; Steering column; Wiring harness; DO NOT attempt SRS wiring repairs. If SRS wiring or harness connectors are faulty, replace faulty wiring harness.;
(1) Replace on all models except 2001-02 Leganza. On 2001-02 Leganza, inspect and replace if damaged.
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

Shop Manual-Ready ToolsFree Quote CheckQuote Shield Pro

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • • You smell fuel, burning insulation, or see smoke.
  • • Brakes feel soft, pull hard to one side, or make grinding noises.
  • • The engine overheats, stalls repeatedly, or misfires under load.
  • • You are missing required tools, torque specs, or safe lifting equipment.
  • • You are not confident in the next step or safety outcome.