Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSHYUNDAI2024KONA LIMITED, 4WDREPAIR AND DIAGNOSISTRANSMISSIONAUTOMATIC TRANSIVT CONTROL SYSTEM - SBCTRANSMISSION CONTROL MODULE (TCM)REMOVAL
2024 Hyundai Kona Limited, 4WD
Transmission Control Module (TCM): Removal
2024 Hyundai Kona Limited, 4WDSECTION Removal
- Perform the oil pressure characteristics backup procedure using the diagnostic tool when replacing with a new TCM.
- Disconnect the negative (-) battery cable.
- Disconnect the TCM connectors (A).
- Remove the TCM bracket assembly (A) after removing the bolts and nut.
Tightening torque :
9.8 - 11.8 N.m (1.0 - 1.2 kgf.m, 7.2 - 8.7 lb-ft)
- Remove the TCM (A) from the bracket after removing the bolts
Tightening torque :
9.8 - 11.8 N.m (1.0 - 1.2 kgf.m, 7.2 - 8.7 lb-ft)
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.