Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSHYUNDAI2024KONA LIMITED, 4WDREPAIR AND DIAGNOSISGENERAL INFORMATIONDTC INDEXOCCUPANT CLASSIFICATION SYSTEM DTCS
2024 Hyundai Kona Limited, 4WD
Occupant Classification System DTCS
2024 Hyundai Kona Limited, 4WDSECTION Occupant Classification System DTCS
OCCUPANT CLASSIFICATION SYSTEM (DTC) IDENTIFICATION
| DTC | Description |
|---|---|
| B1111-17 | Ignition Voltage High |
| B1112-16 | Ignition Voltage Low |
| B1496-54 | OCS Not calibrated |
| B1499-07 | ALR Defect |
| B1603-88 | CAN BUS OFF |
| B1697-87 | ACU Communication error |
| B1763-00 | OCS ECU Defect |
| P1680-87 | Vehicle Speed Communication Fault |
| P1681-81 | Vehicle Speed Message Failure |
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.