Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSHYUNDAI2024KONA LIMITED, 4WDREPAIR AND DIAGNOSISELECTRICALFUSES & CIRCUIT BREAKERSFUSE AND RELAYSBODY DOMAIN CONTROL UNIT (BDC)CONNECTOR AND TERMINAL INFORMATIONCONNECTOR D
2024 Hyundai Kona Limited, 4WD
Connector D
2024 Hyundai Kona Limited, 4WDSECTION Connector D
| Pin No | Function |
|---|---|
| 1 | Driver outside handle antenna(-)_output |
| 2 | Passenger outside handle antenna(-)_output |
| 3 | Interior antenna 1(-)_output |
| 4 | - |
| 5 | Interior antenna 3(-)_output |
| 6 | Bumper antenna(-)_output |
| 7 | Front bumper antenna(-)_output |
| 8 | - |
| 9 | - |
| 10 | - |
| 11 | SSB symbol illumination (+)_output |
| 12 | SSB switch1_input |
| 13 | SSB switch2_input |
| 14 | Starter feedback_input |
| 15 | Driver kappa sensor unlock_input |
| 16 | Passenger kappa sensor unlock_input |
| 17 | Driver kappa sensor lock_input |
| 18 | Passenger kappa sensor lock_input |
| 19 | ESCL ENABLE_output |
| 20 | ESCL unlock switch_input |
| 21 | Driver outside handle antenna(+)_output |
| 22 | Passenger outside handle antenna(+)_output |
| 23 | Interior antenna 1(+)_output |
| 24 | - |
| 25 | Interior antenna 3(+)_output |
| 26 | Bumper antenna(+)_output |
| 27 | Front bumper antenna(+)_output |
| 28 | - |
| 29 | - |
| 30 | - |
| 31 | IGN relay1_output |
| 32 | IGN relay2_output |
| 33 | ACC relay_output |
| 34 | Starter relay_output |
| 35 | Driver outside handle antenna_input |
| 36 | Passenger outside handle antenna_input |
| 37 | - |
| 38 | - |
| 39 | COM ESCL |
| 40 | - |
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.