Quick Lookups: Fluids

2024 Hyundai Ioniq 5 SE, AWDSECTION Fluids
FLUID CAPACITIES
Fluid Type Application Standard Metric Fluid Spec Note S/H
Air Cond Compressor Oil w/Heat Pump N/A N/A POE J639 Approximate Capacity: 6.35 +/- 0.35 oz. S
Air Cond Compressor Oil w/o Heat Pump N/A N/A POE J639 Approximate Capacity: 5.29 +/- 0.35 oz. S
Air Cond Refrigerant w/Heat Pump N/A N/A R-1234yf Approximate Capacity: 2.00 +/- 0.05 lbs. S
Air Cond Refrigerant w/o Heat Pump N/A N/A R-1234yf Approximate Capacity: 1.56 +/- 0.05 lbs. S
Automatic Transmission Fluid AWD Front,Reduction Gear Oil 3.45 QTS. 3.26 L HK ATF 65 SP4M-1 Approximate capacity. S
Automatic Transmission Fluid AWD Rear,Reduction Gear Oil 3.65 QTS. 3.45 L HK ATF 65 SP4M-1 Approximate capacity. S
Brake Fluid N/A N/A SAE J1704 DOT 4 LV, FMVSS 116 DOT 4, ISO 4925 CLASS 6 As required. S
Engine Coolant AWD Coolant,w/Heat Pump 7.20 QTS. 6.81 L Designated coolant water for electric vehicles S
Engine Coolant AWD Coolant,w/o Heat Pump 7.20 QTS. 6.81 L Designated coolant water for electric vehicles S
Engine Coolant AWD Low Conductivity,Extended Type,w/Heat Pump 12.30 QTS. 11.64 L Designated coolant water for electric vehicles S
Engine Coolant AWD Low Conductivity,Extended Type,w/o Heat Pump 12.40 QTS. 11.73 L Designated coolant water for electric vehicles S
Engine Coolant Low Conductivity,Standard Type,w/Heat Pump 9.90 QTS. 9.36 L Designated coolant water for electric vehicles S
Engine Coolant Low Conductivity,Standard Type,w/o Heat Pump 9.30 QTS. 8.8 L Designated coolant water for electric vehicles S
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • β€’ You smell fuel, burning insulation, or see smoke.
  • β€’ Brakes feel soft, pull hard to one side, or make grinding noises.
  • β€’ The engine overheats, stalls repeatedly, or misfires under load.
  • β€’ You are missing required tools, torque specs, or safe lifting equipment.
  • β€’ You are not confident in the next step or safety outcome.