Repair Procedures: Replacement

2022 Hyundai Tucson XRT, 4WDSECTION Replacement
  1. Remove the sunroof assembly.

    (Refer to Sunroof - "SUNROOF ASSEMBLY ")

  2. Remove the sunroof sunshade.

    (Refer to Sunroof - "SUNROOF SUNSHADE ")

  3. Down the slide by pushing it and then remove the drip link assembly (A).
    G14678346Courtesy of HYUNDAI MOTOR AMERICA
  4. Separate the drip link (B) and guide (A).
    G14678347Courtesy of HYUNDAI MOTOR AMERICA
  5. Remove the shoe (A).
    G14678348Courtesy of HYUNDAI MOTOR AMERICA
  6. Separate the guide assembly (A) and the cable (B) by pushing them in the direction of the arrow.
    G14678349Courtesy of HYUNDAI MOTOR AMERICA
  7. To install, reverse the removal procedure.

    Information 

    • Place the position between (A) and (B) like the picture.
    • Make sure to initialize the motor.
    G14678350Courtesy of HYUNDAI MOTOR AMERICA
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • You smell fuel, burning insulation, or see smoke.
  • Brakes feel soft, pull hard to one side, or make grinding noises.
  • The engine overheats, stalls repeatedly, or misfires under load.
  • You are missing required tools, torque specs, or safe lifting equipment.
  • You are not confident in the next step or safety outcome.