DTC Setting Condition

2022 Hyundai Tucson XRT, 4WDSECTION DTC Setting Condition
Troubleshooting Condition Possible Cause
Main Action
  • Monitor the seat position information
  • One or more the Driver Seat Motor's Position Information* was cleared.
    1. "DRIVER LUMBAR SUPPORT MOTOR (FWD/BWD)"
    2. "DRIVER FRONT HEIGHT ADJUSTER MOTOR"
    3. "DRIVER REAR HEIGHT ADJUSTER MOTOR"
    4. "DRIVER SLIDE MOTOR"
    5. "DRIVER RECLINING MOTOR"
Prerequisite Condition
  • IG ON
Threshold Value
  • One or more Driver Seat Motor's Position Information*: Cleared
Diagnosis Time
  • Immediately
DTC Clearing
  • Complete "Seat Limit Position Setting"
Component Name_ETM ETM
PSM* "DRIVER IMS CONTROL MODULE" SD877-1~2
Driver Seat Motor's Position Information* The distance that Driver Seat can be moved from front to back
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • β€’ You smell fuel, burning insulation, or see smoke.
  • β€’ Brakes feel soft, pull hard to one side, or make grinding noises.
  • β€’ The engine overheats, stalls repeatedly, or misfires under load.
  • β€’ You are missing required tools, torque specs, or safe lifting equipment.
  • β€’ You are not confident in the next step or safety outcome.