SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSHYUNDAI2022TUCSON XRT, 4WDREPAIR AND DIAGNOSIS (SINGLE PAGE)ACCESSORIES & EQUIPMENTANTI-THEFT SYSTEMSLIFTGATE (EXCEPT HEV)LIFTGATE TRIMREPAIR PROCEDURESREPLACEMENT[LIFTGATE SIDE TRIM]
2022 Hyundai Tucson XRT, 4WD

[Liftgate Side Trim]

2022 Hyundai Tucson XRT, 4WDSECTION [Liftgate Side Trim]
CAUTION:
  • When removing with a flat-tip screwdriver or remover, wrap protective tape around the tools to prevent damage to components.
  • Put on gloves to prevent hand injuries.
  1. Remove the liftgate upper trim.
  2. Using a screwdriver or remover, remove the side trim (A).
    G14678187Courtesy of HYUNDAI MOTOR AMERICA
  3. To install, reverse removal procedure.

    Information 

    • Replace any damaged clips (or pin-type retainers).
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

Shop Manual-Ready ToolsFree Quote CheckQuote Shield Pro

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • • You smell fuel, burning insulation, or see smoke.
  • • Brakes feel soft, pull hard to one side, or make grinding noises.
  • • The engine overheats, stalls repeatedly, or misfires under load.
  • • You are missing required tools, torque specs, or safe lifting equipment.
  • • You are not confident in the next step or safety outcome.