Trouble Symptom 5 - Cannot Decelerate (Coast) By Using The "Set/-" Switch

2022 Hyundai Santa Cruz SEL, FWDSECTION Trouble Symptom 5 - Cannot Decelerate (Coast) By Using The "Set/-" Switch
Trouble symptom Probable cause Remedy
Cannot decelerate (coast) by using the "SET/-" switch Temporary damaged or disconnected wiring of "SET/-" switch input circuit Repair the harness or replace the "SET/-" switch
Ma function of the ECM signals Check input and output signals at ECM
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • β€’ You smell fuel, burning insulation, or see smoke.
  • β€’ Brakes feel soft, pull hard to one side, or make grinding noises.
  • β€’ The engine overheats, stalls repeatedly, or misfires under load.
  • β€’ You are missing required tools, torque specs, or safe lifting equipment.
  • β€’ You are not confident in the next step or safety outcome.