Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
2022 Hyundai Kona Electric Limited
Quick Lookups: Fluids
2022 Hyundai Kona Electric LimitedSECTION Fluids
| FLUID CAPACITIES | |||||||
|---|---|---|---|---|---|---|---|
| Fluid Type | Application | Standard | Metric | Fluid Spec | Note | S/H | |
| Air Cond Compressor Oil | 6.40 OZS. | 0.18 L | POE | S | |||
| Air Cond Refrigerant | w/Heat Pump | 2.20 LBS. | 0.99 KG | R-1234yf | S | ||
| Air Cond Refrigerant | w/Inner Condenser | 1.40 LBS. | 0.63 KG | R-1234yf | S | ||
| Air Cond Refrigerant | w/Standard Climate Control System | 1.25 LBS. | 0.56 KG | R-1234yf | S | ||
| Automatic Transmission Fluid | N/A | N/A | 70W, API GL-4 TCGO-9 (MS517-14) | Capacity is between: 1.05 - 1.16 qt. | S | ||
| Brake Fluid | 0.70 QTS. | 0.66 L | SAE J1704 DOT 4LV, FMVSS116 DOT 4, ISO4925 CLASS-6 | As required. | S | ||
| Engine Coolant | w/Heat Pump | 14.00 QTS. | 13.24 L | 50/50 mixture of Ethylene Glycol Antifreeze and water | Approximate capacity. The engine coolant should be compatible with aluminum engine parts. | S | |
| Engine Coolant | w/o Heat Pump | 13.50 QTS. | 12.77 L | 50/50 mixture of Ethylene Glycol Antifreeze and water | Approximate capacity. The engine coolant should be compatible with aluminum engine parts. | S | |
| Windshield Washer Fluid | N/A | N/A | Use a good quality windshield washer fluid, diluted with water as necessary. | S | |||
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.