Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSHYUNDAI2022KONA ELECTRIC LIMITEDREPAIR AND DIAGNOSISQUICK LOOKUPSDTC INDEXFRONT VIEW CAMERA DTCS
2022 Hyundai Kona Electric Limited
Front View Camera DTCS
2022 Hyundai Kona Electric LimitedSECTION Front View Camera DTCS
FRONT VIEW CAMERA DIAGNOSTIC TROUBLE CODE (DTC) IDENTIFICATION
| DTC | Description |
|---|---|
| C1101-17 | Battery Voltage High |
| C1102-16 | Battery Voltage Low |
| C1604-49 | ECU H/W Error |
| C1606-49 | ECU S/W Error |
| C160A-87 | Local CAN bus off |
| C160C-87 | Local CAN Time out |
| C1614-87 | CAN Time-Out HCU/VCU/FCU |
| C1616-87 | CAN bus off |
| C161C-86 | CAN Signal Error HCU/VCU/FCU |
| C1623-85 | CAN Time-out Steering Angle Sensor |
| C1623-87 | CAN Time-out Steering Angle Sensor |
| C1625-85 | CAN Time-Out ABS/ESP |
| C1625-87 | CAN Time-Out ABS/ESP |
| C1628-87 | CAN Time-out Cluster |
| C1638-86 | SCC Communication Error by ESC |
| C1642-86 | Invalid signal of ABS/ESP |
| C1656-86 | Invalid signal of CLU |
| C1667-87 | CAN Time-Out SCC |
| C1672-86 | Invalid signal of SAS |
| C1687-85 | CAN Time-Out of MDPS |
| C1687-87 | CAN Time-Out of MDPS |
| C1688-86 | Invalid signal of MDPS |
| C16B0-81 | Camera Failure by Front Radar Failure |
| C16B8-02 | FCA Communication Error |
| C1702-46 | Variant Coding Error |
| C1742-81 | Variant Error - ESC (Check ESC) |
| C1746-86 | HDA Coding & AVN/Navi Option Mismatch |
| C1812-87 | CAN Time-out CGW |
| C1817-86 | Invalid Signal of CGW |
| C1831-86 | CAN Signal Error - Navigation |
| C1862-86 | Invalid Signal of SCC |
| C1863-87 | CAN Time-out NAVI for HDA |
| C2239-86 | MDPS Steering Control Failure for LKA |
| C2721-46 | System Calibration Required |
| C2722-46 | System Out of Calibration |
| C28B8-81 | ESP reversible Error |
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.