Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSHYUNDAI2017SANTA FE SE, FWDREPAIR AND DIAGNOSISENGINE PERFORMANCEFUEL DELIVERYFUEL DELIVERY SYSTEMFUEL PRESSURE REGULATORREPAIR PROCEDURESREMOVAL
2017 Hyundai Santa Fe SE, FWD
Repair Procedures: Removal
2017 Hyundai Santa Fe SE, FWDSECTION Removal
- Remove the fuel pump.
(Refer to "FUEL PUMP ")
- Disconnect the electric pump wiring connector (A) and the fuel sender connector (B).
- Remove the fuel sender (A) after releasing the fix hook.
- Remove the fixing clip, and then disconnect the fuel feed tube quick-connector (B).
- Remove the head assembly (C) after releasing the fixing hooks.
- Remove the reservior-cup (A) after releasing the fixing hooks.
- Remove the fuel pressure regulator (A) after releasing the fixing hooks.
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.