Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
DTC C1503: TCS/ESC (ESP) Switch Error: General Description
Driver can inhibit the ESC (ESP) control by ESC (ESP) switch.
When switch signal sends into the HECU, the ESC (ESP) warning lamp goes "ON" and the ESC (ESP) control is stopped and if the next switch signal is inputted again, the ESC (ESP) control is ready. This function is used for sporty driving or vehicle inspection.
NO RELATED
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.