Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSHYUNDAI2017SANTA FE SE, FWDREPAIR AND DIAGNOSIS (SINGLE PAGE)QUICK LOOKUPSDTC INDEXCLUSTER MODULE DTCS
2017 Hyundai Santa Fe SE, FWD
Cluster Module DTCS
2017 Hyundai Santa Fe SE, FWDSECTION Cluster Module DTCS
CLUSTER MODULE DIAGNOSTIC TROUBLE CODE IDENTIFICATION
| DTC | Description |
|---|---|
| DTC B1000 | 51: EOL Not Programmed |
| DTC B1002 | 52: EPB Missing Error |
| DTC B1002 | 55: EPB Present Error |
| DTC B1003 | 52: ABS Missing Error - without ABS unit or connector fault |
| DTC B1003 | 55: ABS Present Error - Coding code error |
| DTC B1005 | 52: Airbag Missing Error - without Airbag unit or connector fault |
| DTC B1005 | 55: Airbag Present Error - Coding code error |
| DTC B1007 | 52: AFLS Missing Error - without AFLS unit or connector fault |
| DTC B1007 | 55: AFLS Present Error - Coding code error |
| DTC B1008 | 52: MDPS Missing Error |
| DTC B1008 | 55: MDPS Present Error |
| DTC B1009 | 52: 4WD Missing Error - without 4WDD unit or connector fault |
| DTC B1009 | 55: 4WD Present Error - Coding code error |
| DTC B1010 | 52: ESC Missing Error |
| DTC B1010 | 55: ESC Present Error |
| DTC B1020 | 52: TPMS Missing Error |
| DTC B1020 | 55: TPMS Present Error |
| DTC B1040 | 52: LKAS/LDWS Missing Error - without LKAS/LDWS unit or connector fault |
| DTC B1040 | 55: LKAS/LDWS Present Error - Coding code error |
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.