Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSHYUNDAI2017SANTA FE SE, FWDREPAIR AND DIAGNOSIS (SINGLE PAGE)BRAKESMECHANICAL - HYDRAULICBRAKE SYSTEM - GENERAL INFORMATIONSPECIFICATIONSSERVICE STANDARD
2017 Hyundai Santa Fe SE, FWD
Service Standard
2017 Hyundai Santa Fe SE, FWDSECTION Service Standard
BRAKE SYSTEM SERVICE STANDARD
| Items | Standard value |
|---|---|
| Brake pedal Full stroke | 117.1 mm (4.61 in) |
| Stop lamp switch clearance | 1.0 ~ 2.0 mm (0.04 ~ 0.08 in) |
| Brake pedal free play | 3 ~ 8 mm (0.12 ~ 0.31 in) |
| Front brake disc thickness | 28 mm (1.10 in) |
| Front brake disc pad thickness | 11 mm (0.43 in) |
| Rear brake disc thickness | 11 mm (0.43 in) |
| Rear brake disc pad thickness | 10 mm (0.39 in) |
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.