Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
Multi-View Camera Unit
2017 Hyundai Santa Fe SE, FWDSECTION Multi-View Camera Unit
PIN IDENTIFICATIONCHART
| No | Connector A | No | Connector B |
|---|---|---|---|
| 1 | Front camera - Power | 1 | Switch indicator |
| 2 | Front camera - GND | 2 | Chassis CAN low |
| 3 | Right camera - Power | 3 | - |
| 4 | Right camera - GND | 4 | IGN2 |
| 5 | Front camera - video input | 5 | ACC |
| 6 | Front camera - video GND | 6 | Multi-View Camera switch |
| 7 | Right camera - video input | 7 | Chassis CAN high |
| 8 | Right camera - video GND | 8 | GND |
| 9 | Multi-View Camera video output Y | 9 | - |
| 10 | Multi-View Camera video output C | 10 | - |
| 11 | - | ||
| 12 | - | ||
| 13 | Rear camera - Power | ||
| 14 | Rear camera - GND | ||
| 15 | Left camera - Power | ||
| 16 | Left camera - GND | ||
| 17 | Rear camera - video input | ||
| 18 | Rear camera - video GND | ||
| 19 | Left camera - video input | ||
| 20 | Left camera - video GND | ||
| 21 | Multi-View Camera video GND Y | ||
| 22 | Multi-View Camera video GND C | ||
| 23 | - | ||
| 24 | - | ||
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.