Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
Function Of Safety Power Window: Notes
When driver door power window auto-up switch is operated, safety function is activated.
- Safety function condition
When detect the force of 100N (using the 10N/mm spring) during the window rising, window is reversed.
- Length of window reversing (except holding the auto-up switch)
- Length of window reversing (holding the auto-up switch)
- When detect the jamming during holding the auto-up switch.
- → Window is reverse until 25mm from jamming position.
- Auto-up function is not available during the 5 seconds from above condition.
- → When holding the auto-up switch, window is operated as a manual-up function. (Safety function is not activated.)
- When holding the auto-up switch after 5 seconds from above condition.
- → Window is reverse until 25mm from jamming position.
- When detect the jamming during holding the auto-up switch.
- Safety function is not available area
Safety function is not available during the 4mm from top of the door.
NO RELATED
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.