Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSHYUNDAI2017IONIQ ELECTRICREPAIR AND DIAGNOSIS (SINGLE PAGE)ACCESSORIES & EQUIPMENTDRIVERS ASSISTANCE SYSTEMS - ADASMULTI FUNCTION CAMERA DIAGNOSIS (EV)
2017 Hyundai Ioniq Electric
Multi Function Camera Diagnosis (EV)
2017 Hyundai Ioniq ElectricSECTION Multi Function Camera Diagnosis (EV)
- DTC Index
- DTC C1101-17: Battery Voltage High
- DTC C1102-16: Battery Voltage Low
- DTC C1532-11: LKAS Switch Failure
- DTC C1532-12: LKAS Switch Failure
- DTC C1532-86: LKAS Switch Failure
- DTC C1604-49: ECU Hardware Error
- DTC C1606-49: ECU Software Error
- DTC C160A-87: Local CAN BUS OFF
- DTC C160C-87: Local CAN Timeout
- DTC C1614-87: CAN Time-Out HCU/VCU/FCU
- DTC C1616-87: Can Bus Off
- DTC C1623-85: CAN Timeout Of SAS (Time Delta)
- DTC C1623-87: CAN Timeout Of SAS (Missing)
- DTC C1625-85: CAN Timeout Of ABS ESP (Time Delta)
- DTC C1625-87: CAN Timeout Of ABS ESP (Missing)
- DTC C1628-87: CAN Timeout Of CLU
- DTC C1642-86: Invalid Signal Of ABS ESP
- DTC C1656-86: Invalid Signal Of CLU
- DTC C1672-86: Invalid Signal Of SAS
- DTC C1687-85: CAN Timeout Of MDPS (Time Delta)
- DTC C1687-87: CAN Timeout Of MDPS (Missing)
- DTC C1688-86: Invalid signal Of MDPS
- DTC C1702-46: Variant Coding Required
- DTC C1812-87: CAN Timeout Of CGW
- DTC C1817-86: Invalid Signal Of CGW
- DTC C2223-86: MDPS Steering Control Failure
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.