Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSHYUNDAI2014VELOSTER BASE, STANDARD TRANSREPAIR AND DIAGNOSIS (SINGLE PAGE)QUICK LOOKUPSDTC INDEXAIR CONDITIONING SYSTEM DTCS
2014 Hyundai Veloster Base, Standard Trans
Air Conditioning System DTCS
2014 Hyundai Veloster Base, Standard TransSECTION Air Conditioning System DTCS
AIR CONDITIONING SYSTEM DIAGNOSTIC TROUBLE CODES (DTC) IDENTIFICATION
| DTC | Description |
|---|---|
| DTC B1202 | Heater/Engine-Coolant Water Temperature Sensor Open (High) |
| DTC B1203 | Heater/Engine-Coolant Water Temperature Sensor Short (Low) |
| DTC B1208 | Intake Potentiometer Open (Low) |
| DTC B1209 | Intake Potentiometer Short (High) |
| DTC B1233 | In-Car Temperature Sensor Short (Low) |
| DTC B1234 | In-Car Temperature Sensor Open (High) |
| DTC B1237 | Ambient Temperature Sensor Short (Low) |
| DTC B1238 | Ambient Temperature Sensor Open (High) |
| DTC B1241 | Evaporator Sensor Short (Low) |
| DTC B1242 | Evaporator Sensor Open (High) |
| DTC B1245 | Air Mix Potentiometer Open (Low) - Driver |
| DTC B1246 | Air Mix Potentiometer Short (High)-Driver |
| DTC B1249 | Direction Potentiometer Open (Low)-Driver |
| DTC B1250 | Direction Potentiometer Short (High)-Driver |
| DTC B1686 | Vehicle Speed Sensor Fault-CAN Signal |
| DTC B1687 | Engine Coolant Temperature Sensor Circuit-CAN Signal |
| DTC B2406 | Air Mix Motor-Driver |
| DTC B2408 | Intake Motor |
| DTC B2409 | Direction Control Motor-Driver |
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.