Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DBβ LIVE
HOMESERVICE MANUALSHYUNDAI2014SANTA FE XL PREMIUMREPAIR AND DIAGNOSIS (SINGLE PAGE)ENGINE PERFORMANCEENGINE CONTROL SYSTEMSENGINE CONTROL/FUEL SYSTEM - GENERAL INFORMATIONSPECIFICATIONSTIGHTENING TORQUESFUEL DELIVERY SYSTEM
2014 Hyundai Santa Fe XL Premium
Fuel Delivery System
2014 Hyundai Santa Fe XL PremiumSECTION Fuel Delivery System
| Item | kgf.m | N.m | lb-ft |
|---|---|---|---|
| Fuel tank band installation nut | 4.0 ~ 5.5 | 39.2 ~ 54.0 | 28.9 ~ 39.8 |
| Fuel tank band installation bolt | 4.5 ~ 6.0 | 44.1 ~ 58.9 | 32.6 ~ 43.4 |
| Fuel pump locking ring installation | 13.7 ~ 41.4 | 135 ~ 406 | 99.6 ~ 299 |
| Filler-neck assembly bracket installation nut | 0.4 ~ 0.6 | 3.9 ~ 5.9 | 2.9 ~ 4.3 |
| Accelerator pedal module installation bolt | 0.9 ~ 1.4 | 8.8 ~ 13.7 | 6.5 ~ 10.1 |
| Accelerator pedal module installation nut | 1.7 ~ 2.6 | 11.7 ~ 25.5 | 12.3 ~ 18.8 |
| Delivery pipe installation bolt | 1.9 ~ 2.4 | 18.6 ~ 23.5 | 13.7 ~ 17.4 |
| High pressure fuel pipe function block installation bolt | 0.8 ~ 1.2 | 7.8 ~ 11.8 | 5.8 ~ 8.7 |
| High pressure fuel pump installation bolt | 1.3 ~ 1.5 | 12.8 ~ 14.7 | 9.4 ~ 10.9 |
| High pressure fuel pipe installation nut | 3.0 ~ 3.6 | 29.4 ~ 35.3 | 21.7 ~ 26.0 |
| High pressure fuel pipe bracket installation bolt | 0.8 ~ 1.2 | 7.8 ~ 11.8 | 5.8 ~ 8.7 |
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- β’ You smell fuel, burning insulation, or see smoke.
- β’ Brakes feel soft, pull hard to one side, or make grinding noises.
- β’ The engine overheats, stalls repeatedly, or misfires under load.
- β’ You are missing required tools, torque specs, or safe lifting equipment.
- β’ You are not confident in the next step or safety outcome.