SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSHYUNDAI2014SANTA FE XL PREMIUMREPAIR AND DIAGNOSIS (SINGLE PAGE)BODY & FRAMEDOOR LOCKSIMMOBILIZER SYSTEM DIAGNOSISDTC P1698: IMMOBILIZER-INVALID TP (TP HAS DIFFERENT PIN)DTC INFORMATIONDTC DETECTING CONDITION
2014 Hyundai Santa Fe XL Premium

DTC Information: DTC Detecting Condition

2014 Hyundai Santa Fe XL PremiumSECTION DTC Detecting Condition
Item Detecting Condition Possible Cause
DTC Strategy
  • Data status receiving from transponder
  1. Faulty Transponder
Threshold value
  • When the coil supplies energy to the transponder which in turn accumulates energy in the condenser, ICU transmits the data (40bit) to the transponder

    If PCM detects difference between data receiving from transponder and predetermined value, DTC will set
Detecting time
  • 1 time
DTC Erasing
Condition
  • Without a fault or using a GDS
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

Shop Manual-Ready ToolsFree Quote CheckQuote Shield Pro

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • • You smell fuel, burning insulation, or see smoke.
  • • Brakes feel soft, pull hard to one side, or make grinding noises.
  • • The engine overheats, stalls repeatedly, or misfires under load.
  • • You are missing required tools, torque specs, or safe lifting equipment.
  • • You are not confident in the next step or safety outcome.