Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSHYUNDAI2014SANTA FE XL LIMITEDREPAIR AND DIAGNOSISGENERAL INFORMATIONDTC INDEXCLUSTER MODULE DTCS
2014 Hyundai Santa Fe XL Limited
Cluster Module DTCS
2014 Hyundai Santa Fe XL LimitedSECTION Cluster Module DTCS
CLUSTER MODULE DIAGNOSTIC TROUBLE CODES (DTC) LIST
| DTC | Description |
|---|---|
| DTC B100051 | EOL Not Programmed |
| DTC B100252 | EPB Missing Error |
| DTC B100255 | EPB Present Error |
| DTC B100352 | ABS Missing Error - without ABS unit or connector fault |
| DTC B100355 | ABS Present Error - Coding code error |
| DTC B100552 | Airbag Missing Error - without Airbag unit or connector fault |
| DTC B100555 | Airbag Present Error - Coding code error |
| DTC B100752 | AFLS Missing Error - without AFLS unit or connector fault |
| DTC B100755 | AFLS Present Error - Coding code error |
| DTC B100852 | MDPS Missing Error |
| DTC B100855 | MDPS Present Error |
| DTC B100952 | 4WD Missing Error - without 4WD unit or connector fault |
| DTC B100955 | 4WD Present Error - Coding code error |
| DTC B101052 | ESC Missing Error |
| DTC B101055 | ESC Present Error |
| DTC B102052 | TPMS Missing Error |
| DTC B102055 | TPMS Present Error |
| DTC B104052 | LKAS/LDWS Missing Error - without LKAS/LDWS unit or connector fault |
| DTC B104055 | LKAS/LDWS Present Error - Coding code error |
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.