Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSHYUNDAI2014AZERA LIMITEDREPAIR AND DIAGNOSIS (SINGLE PAGE)ELECTRICALSTARTERSTARTING SYSTEMSTARTER RELAYREPAIR PROCEDURESINSPECTION
2014 Hyundai Azera Limited
Repair Procedures: Inspection
2014 Hyundai Azera LimitedSECTION Inspection
- Remove the fuse box cover.
- Remove the starter relay (A).
- Using an ohmmeter, check that there is continuity between each terminal.
Terminal Continuity 30 - 87 NO 85 - 86 YES - Apply 12V to terminal 85 and ground to terminal 86.
Check for continuity between terminals 30 and 87.
- If there is no continuity, replace the starter relay.
- Install the starter relay.
- Install the fuse box cover.
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.